Main panels and subpanels
Licensed Electrical Panel Installation in Gastonia, NC
Adding a garage workshop, finishing a basement or building an addition often means new circuits the existing panel cannot hold. Our licensed electricians install main panels and subpanels across Gaston County, permitted and inspected.
Get an Electrical Panel Installation Quote
Tell us about the job and a Roland Black specialist will call you back.
- Years serving Gaston County
- 50+
- Average Google rating
- 4.9
- Google reviews
- 1,180+
- Warranty on our work
- 10-yr
Certified installer for
The right panel in the right place
A subpanel puts breakers where the new loads are, which keeps circuit runs short and makes a detached garage or workshop far simpler to wire. A new main panel replaces equipment that is worn, damaged or out of space. Either way, the installation is sized with a load calculation and built to current code. If your existing panel is only acting up, electrical panel repair may be all you need, and we will tell you so.
What a Roland Black electrical panel installation includes
- 01
A load calculation
We work out what the new space or equipment will draw and size the panel and its feeder to match.
- 02
Panel location and feeder route
The panel goes where code clearances are met, with the cleanest feeder route back to the main service.
- 03
Installation and wiring
The panel is mounted, the feeder installed and the new circuits terminated, with every breaker labeled.
- 04
Grounding and bonding
Subpanels get separated neutrals and grounds as code requires, and main panels get grounding brought to current standards.
- 05
Permit and inspection
We pull the permit, pass the inspection and leave you a labeled panel with a clear map of the circuits.
Why homeowners pick us for electrical panel installation
Sized for the project
A load calculation sets the panel and feeder size, so the new space has room without starving the rest of the house.
Neat, labeled work
Every circuit is labeled and every run is tidy, which makes any future work faster and safer.
Code details done right
Separated neutrals, proper clearances and correct breaker listings are what inspectors check, and we get them right the first time.
One crew for the whole job
The panel, the feeder and the new circuits are handled by the same licensed crew from start to finish.
Panel installation errors we correct
These are the mistakes we find most often when we are called in after someone else's installation.
Neutral and ground bonded in a subpanel
Subpanels must keep neutrals and grounds separate. Bonding them together can put current on metal parts that should never carry it.
A panel squeezed into the wrong spot
Panels need clear working space in front and cannot go in places like bathrooms or clothes closets. A poor location fails inspection.
A feeder too small for the panel
A subpanel is only as good as the feeder that supplies it. An undersized feeder overheats and limits what the new panel can carry.
The same crew from permit to final inspection
Our licensed electricians handle the planning, the installation and the inspection, so your project never stalls between trades.
How your electrical panel installation runs
- 1
Plan the space
Tell us what you are adding. We visit, calculate the load and choose where the panel should go.
- 2
Get it in writing
Panel size, feeder, circuits, permit and financing options arrive in a written quote.
- 3
Install the panel
We mount the panel, run the feeder and wire each of the new circuits.
- 4
Pass inspection
The inspector signs off, and you get a labeled panel plus a walk-through of the circuits.
Electrical Panel Installation questions, answered
The main panel takes power from the utility and protects every circuit in the house. A subpanel is fed from the main panel and adds breakers in another location, such as a garage, basement or addition.
If you are adding several circuits out there, especially for tools, a heater or an EV charger, a subpanel is usually the cleanest option. A load calculation confirms the main panel can supply it.
Often, yes, as long as the new spot meets code clearances and the service can be routed to it. We go over the options during the visit.
Yes. Panel installations are permitted and inspected. We schedule the inspection and meet the inspector on site.
Related services
Electrical Panel Upgrade
View service
EV Charger Installation
View service
Electrical Panel Repair
View service
Not sure which one you need? Call (980) 206-3523 and talk it through with a licensed electrician.
Get your free generator or electrical quote
Tell us about the job and we will call you back to talk it through. For outages and electrical emergencies, call now. We answer around the clock.
Open 24/7 for emergencies(980) 206-3523- Licensed in NC and SC, and insured
- Backed by a 10-year warranty
- Financing available
Send us the details
A Roland Black specialist will follow up with options and a written quote.