From Myers Park to Ballantyne
Expert Electrical Panel Upgrade in Charlotte, NC
Many Myers Park houses went up in the 1910s and 1920s, decades before one panel had to run a heat pump, an induction range and an EV charger. Across Mecklenburg County, we size those services up to 200 amps and book Duke's reconnect.
Get an Electrical Panel Upgrade Quote in Charlotte
Tell us about the job and we will call you back to set up a visit in Charlotte.
- Years serving Gaston County
- 50+
- Average Google rating
- 4.9
- Google reviews
- 1,180+
- Warranty on our work
- 10-yr
Certified installer for
Where the extra amps go in a Charlotte house
A full upgrade swaps the meter base, service entrance cable and main breaker as one set. If a SouthPark or Ballantyne house already has 200 amps and has only run out of breaker slots, electrical panel installation in Charlotte usually covers it, and the load calculation settles which job the house needs.
Induction in Myers Park
A Myers Park kitchen remodel that brings in an induction range gets its 240 volt circuit on a service with capacity left for the rest of the house.
Backup heat on January nights
Trading a furnace for a heat pump means electric backup strips switch on when Charlotte January lows dip under freezing, and those strips need breakers sized for them.
NoDa fuses become breakers
A NoDa mill house still on screw-in fuses moves to a breaker panel, and a tripped circuit takes a flip of a handle instead of a spare fuse.
Dilworth additions carried
A Dilworth bungalow gaining a rear primary suite or a finished attic gets those circuits on a service sized to carry them with everything already there.
A Ballantyne garage charger
A two-story Ballantyne house adding a Level 2 charger gets a dedicated 240 volt circuit, so overnight charging never fights the oven for amps.
Room for standby power
The new panel keeps spaces and a marked transfer switch spot free, so a standby generator can tie in later if rotating outages like Christmas Eve 2022 return.
How we run a Charlotte service upgrade, from meter seal to inspection
Duke hears from us twice
Duke Energy's service manual requires a licensed electrical contractor to notify the utility before a meter seal is broken and again right after the work. We place both calls.
County pass before the meter
Duke will not set a meter on an altered service until the inspecting authority reports a pass. In Charlotte that is Mecklenburg County Code Enforcement, and we book that inspection ourselves.
A socket from Duke's list
Duke accepts only meter sockets from its Meter Equipment Group approved list, installed without modification, so the new 200 amp base is chosen from that list before anything is ordered.
Clamp readings before sizing
Our licensed electricians measure running loads with a clamp meter and work the calculation on paper, because a streetcar-era Plaza Midwood house and a Ballantyne two-story rarely land on one answer.
Rated 4.9 by Google reviewers
Roland Black, a Gastonia business since 1973, is rated 4.9 across 1,180+ Google reviews. Ask about the 10-year warranty and financing, and call (980) 206-3523 at any hour.
Charlotte panel upgrade questions, from permit to power-on
Mecklenburg County Code Enforcement, the county office (under LUESA) that permits and inspects electrical work for Charlotte. The same office issues electrical permits for Cornelius, Davidson, Huntersville, Matthews, Mint Hill and Pineville. We file the permit, meet the county inspector at the house, and once the inspection passes, Duke Energy reconnects the new service.
We quote replacement, not repair. The whole panel comes out, including its bus and breakers, rather than being patched with salvaged or look-alike parts. Replacing it also gives us the chance to size the service for the heat pump, charger or addition you are planning. If the house needs more amps too, the new panel and the move to 200 amps become one permitted job.
Yes, for the stretch while the meter is pulled and the new meter base and main panel go in. We notify Duke Energy before breaking the meter seal and again when the work is done, as its service manual requires. Once Mecklenburg County passes the inspection, Duke sets the meter. We tell you the date ahead of time so medical equipment and the fridge can be planned around.
Get a written Charlotte panel upgrade quote
Send the form with a photo of your panel label and main breaker, or call (980) 206-3523. We will measure the loads and put the upgrade in a free written quote.
Get your free generator or electrical quote
Tell us about the job and we will call you back to talk it through. For outages and electrical emergencies, call now. We answer around the clock.
Open 24/7 for emergencies(980) 206-3523- Licensed in NC and SC, and insured
- Backed by a 10-year warranty
- Financing available
Send us the details
A Roland Black specialist will follow up with options and a written quote.